UV lamp

 104,00 448,00 HT

Shipped with its O-ring! 13000 hours long life!

UV water disinfection lamps for BioUV and REUT range

  • REUT reactors S, M, L, XL
  • UV10, UV20, UV30, UV40
  • UV170, UV250, UV 340
  • UV3000 HO; UV3205 HO; UV4205 HO; UV5205 HO; UV6205 HO; UV6273 HO
  • UV HOME 2, 3, 4, 6, 9
  • Delta UV type E ou ES 5, 10, 15, 20, 40
  • IBP 10HO+; IBP 30HO+; IBP 40HO+; IBP 2150HO+; IBP 3150HO+; IBP 4205HO+; IBP 5205HO+
  • The entire DW drinking water range
SKU: uv-lamp Category:

UV lamp for disinfection

UV lamp are part of the UVC disinfection system. Depending on the quality of the water to be treated, each UV lamp can disinfect up to several hundred liters per minute. Standard low pressure UV lamps made of quartz glass offer ehigh efficiency. 90% of the electrical power can be used as 254 nm UVC radiation to disinfect water.

UV lamp maintenance

Before any intervention, remember that :

    1. UV lamp must be recycled according to the regulations of your country. Do not throw them in the regular or industrial waste, as they contain mercury particles.
    2. Do not put your fingers on the glass when replacing a UV lamp Cleaning the lamps with alcohol will remove any traces.
    3. The light generated by a UV lamp must be carefully protected from direct or indirect view.

When replacing the UVC lamp, be careful not to put your fingers on the glass. Cleaning the lamps with alcohol will remove any finger marks.

When should you replace?

It is recommended to change the UV lamp after 13,000 hours of operation, to maintain the guarantee of a sufficient level of irradiation. This replacement can be done simultaneously as the Quartz UV sleeves (if they are damaged). When the sleeves are properly maintained, experience shows that a replacement every two lamps is sufficient (here every 26000 hours / 3 years for example)

How is the UV lamp maintenance carried out?

Materials needed:

Once you have stopped and secured your installation, you just have to remove the connector part to access the UV lamps.

  1. Remove the old UV lamp and O-ring
  2. Replace the quartz sleeve if necessary
  3. Mount the new lamp
  4. Place the new O-ring
  5. Reattach the connector part

How to recycle UV lamps?

That’s easy! Put the old UV lamp in the new lamp package and, for those using original Bio UV reactors, write “recycling” and then ship your used lamps to an approved recycling facility.

  • Pools
  • Spa
  • Aquariums and freshwater ponds
  • Aquaponics
  • Aquaculture / freshwater fish farming
  • Specifically, all fresh and clear waters containing less than 20 mg/L of TSS, NTU < 1, and iron < 0,1 mg/L

The UV germicidal lamp disinfect the water effectively. This space-saving solution offers protection against leakage, temperature fluctuations, fouling and breakage. A UV disinfection reactor with good UV quartz sleeves can prevent environmental damage permanently.

  • UV lamps from the most recent technologies with High Intensity (HO) performance
  • Very long lamp life (13,000 hours depending on the number of times the lamp is turned on)
  • High performance
  • Low power consumption
  • UV lamps adapted to your needs (see UV disinfection sizing section)
  • Maintenance: easy and quick to change the lamp

UV disinfection reactor fresh water range UV10 UV20 UV30 UV40 1h2o3

Compact fresh water UV disinfection reactor range UV 170 UV 250 UV 340 1h2o3

UV disinfection reactor fresh water range UV3000HO UV3205HO UV4205HO UV5205HO UV6205HO UV6273HO 1h2o3

Available at any time:

Delivered with: Assembly instructions

Free shipping for any order over 1200€ in CE. For any order under 250€, an administration fee of 35€ will be charged. When placing your order, please indicate where you would like to be delivered.
To benefit from a VAT exemption, companies from EC member countries must indicate the company name and their VAT number.


  • One week.

Once the order has been placed, the above-mentioned period runs (excluding weeks 31 to 34 and 51 to 52) from the date of receipt of payment and validation of the project plan (including all the options requested in the case of special requests). As soon as the equipment is ready, it will be shipped to you. A road transport requires approximately one week to set up, it can take up to 3 weeks for a container depending on the destination.
Please refer to the supplier’s specific terms and conditions for more information.


Upon receipt of the package, in case of damage or missing, you must do :

  • To the carrier: immediate observation and confirmation of reservations by registered letter with acknowledgement of receipt, within 3 days of receipt of goods.
  • To the supplier: complaints about apparent defects or non-conformity of the product delivered with the product ordered or with the delivery note, must be made in writing within 3 days of the arrival of the product.

Please refer to the supplier’s specific terms and conditions for more information.

All returns of items considered new by the customer must be made within two weeks of receipt.
All product returns must be formally agreed between the seller and the buyer.
Any product returned without this agreement will be held at the disposal of the buyer and will not give rise to the establishment of a credit. The costs and risks of the return are always at the buyer’s expense.
Please refer to the supplier’s specific terms and conditions for more information.

Shopping Cart