UV quartz sleeves

 54,00 158,00 HT

UV quartz sleeves: protection of UV water disinfection lamps for BioUV and REUT ranges

  • REUT S, M, L, XL Reactor
  • UV10, UV20, UV30, UV40
  • UV170, UV250, UV 340
  • UV3000 HO; UV3205 HO; UV4205 HO; UV5205 HO; UV6205 HO; UV6273 HO
  • UV HOME 2, 3, 4, 6, 9
  • Delta UV type E or ES 5, 10, 15, 20, 40
  • IBP 10HO+; IBP 30HO+; IBP 40HO+; IBP 2150HO+; IBP 3150HO+; IBP 4205HO+; IBP 5205HO+
SKU: quartz-sleeve Category:

UV quartz sleeves provide protection against leakage, temperature fluctuations, fouling and breakage. A UV disinfection system with good UV Quartz will prevent environmental hazards in the long run.

UV quartz sleeves for disinfection

1H2O3 provides premium quality UV quartz tubes. With a wide range of choices, our UV quartz tubes can be used in a variety of industrial applications. For example, water disinfection units (aquaponics, aquaculture, swimming pools, water treatment plants and drinking water plants) and photochemical reactors as well as other specialized equipment. Used in conjunction with UV germicidal bulbs in water disinfection units and other specialized equipment, UV quartz sleeves offer protection against leakage, temperature fluctuations, fouling and breakage.

Quartz tube properties

The UV Quartz Sleeve line is manufactured to the highest quality standards in the industry by the leading lamp manufacturers. They have a fire polished finish and are available in a wide range of diameters, wall thicknesses and lengths. In addition, they are compatible for standard, high efficiency (HO) and amalgam models.

Comment se déroule l’opération de maintenance des gaines quartz UV ?

Quartz UV sleeves maintenance

Before any intervention, remember that :

    • When replacing a UV lamp, do not put your fingers on the glass. Cleaning the sleeves with alcohol will remove any traces.
    • The light produced by a UV bulb must be carefully protected from direct or indirect view.

When should I replace it?

It is suggested to replace the UV quartz sleeves after 26000 hours / 3 years of service, in order to keep the guarantee of a sufficient level of irradiation. This replacement can be done at the same time as the UV lamp replacement.

How does the maintenance of quartz sleeves work?

Materials needed:

  • New UV lamp
  • O-ring (included with the UV lamp)
  • UV quartz sleeve

After shutting down and securing your installation, you only need to remove the connector part to access the UV lamps.

  1. Remove the old UV lamp and its O-ring
  2. Replace the quartz sleeve.
  3. Install the new bulb
  4. Position the new O-ring
  5. Refix the connector part

How to recycle quartz sleeves?

The easiest way to do this is by recycling the quartz tube with the glass. Alternatively, when you have a lamp to recycle as well, you can enclose the quartz tube with the old UV lamp in the packaging of the new lamp and, for those using original Bio UV reactors, write “recycle” and then ship it to an approved recycling facility for reprocessing of your used lamps and sleeves.

  • Pools
  • Spas
  • Aquariums and freshwater ponds
  • Aquaponics
  • Freshwater aquaculture / fish farming
  • Usually, all fresh and clear waters containing less than 20 mg/L of TSS, NTU < 1, and iron < 0.1 mg/L

Germicidal UV bulbs efficiently purify water. This compact solution offers protection against leakage, temperature fluctuations, fouling and breakage. A UV disinfection reactor with good quartz UV sleeves prevents environmental risks over time.

Réacteur désinfection UV eau douce gamme UV10 UV20 UV30 UV40 1h2o3

Réacteur compact de désinfection UV eau douce gamme UV170 UV250 UV340 1h2o3

Réacteur de désinfection UV eau douce gamme UV3000HO UV3205HO UV4205HO UV5205HO UV6205HO UV6273HO 1h2o3

 

Available at any time:

Supplied with the delivery: Assembly guide.

Delivery
Shipping is free for any order over 1200€ in CE. For orders under 250€, an administrative fee of 35€ will be charged. When placing your order, please indicate where you would like your order to be delivered.
To benefit from a VAT exemption, companies from EC member countries must indicate the company name and VAT number.

Delays

  • One week.

Once the order has been placed, the above-mentioned time period starts (except for weeks 31 to 34 and 51 to 52) from the date of receipt of payment and validation of the project plan (including all the options requested in the case of special requests). As soon as the equipment is ready, it will be shipped to you. Road transport requires an average of one week for set-up, it can take up to 3 weeks for a container depending on the destination.
Please refer to the supplier’s specific terms and conditions for more information.

Receipt

Upon receipt of the package, in case of damage or shortage, please make :

  • To the carrier: Any necessary observation must be made immediately and the reservations must be confirmed by registered letter with acknowledgement of receipt, within 3 days of receipt of the goods.
  • To the supplier: complaints about apparent defects or non-conformity of the delivered product to the ordered product or to the dispatch note, must be made in writing within 3 days of the arrival of the product.

Please check the supplier’s specific terms and conditions for more information.

Returns
All returns of items considered new by the customer must be returned within two weeks of receipt.
All product returns must be formally agreed upon between the seller and the buyer.
Any product returned without this agreement will be held at the disposal of the buyer and will not give rise to the establishment of a credit note. The costs and risks of return are always at the buyer’s expense.
Please refer to the supplier’s specific terms and conditions for more information.

Shopping Cart
preloader