Design form:

Lamella block

Step 1 of 2

50%

Project information
You are looking for lamella blocks to::*
- Add/replace slats in an existing pool
- Build a new lamellar tank
For which application?*
drinking water, municipal sanitation, rainwater...
Preferred language
- French
- English
Maximum water temperature (degrees)*
Please enter a number from 0 to 60.
Materials are not compatible with the use of water >60°C
Pool length (m)*
Pool width (m)*
Peak flow rate (m3/h)*
Projected area required (m²)*
If you don't know this value, you can determine it here: https://www.1h2o3.com/outils/dimensionnement-dun-decanteur-lamellaire/
Characteristics of the lamella blocks
Desired lamella inclination*
- 60°
- 55°
- 50°
- 45°
Desired lamella spacing (mm)
Please enter a number from 0 to 300.
Desired lamella width*
- 1 m
- 1,22 m
- 1,5 m
Estimated total projected area (m²)
Estimated length of block required (m)
Length given for the selected width

There are many other parameters that need to be checked to ensure the proper design of lamella blocks. We will contact you to evaluate your request. One essential piece of data concerns the settling speed (or Hazen speed). To determine it easily, just follow this little tutorial!
Option for lamella blocks*
- Socket and weir channel DN 110
- Socket and weir channel DN 160
- No weir channel
Projet's name*
Destination country*
Country in which the equipment will be installed
Contact
First Last
Phone number
E-mail*
Name
This field is for validation purposes and should be left unchanged.

Step 1 of 2

50%

Project information
You are looking for lamella blocks to::*
- Add/replace slats in an existing pool
- Build a new lamellar tank
For which application?*
drinking water, municipal sanitation, rainwater...
Preferred language
- French
- English
Maximum water temperature (degrees)*
Please enter a number from 0 to 60.
Materials are not compatible with the use of water >60°C
Pool length (m)*
Pool width (m)*
Peak flow rate (m3/h)*
Projected area required (m²)*
If you don't know this value, you can determine it here: https://www.1h2o3.com/outils/dimensionnement-dun-decanteur-lamellaire/
Characteristics of the lamella blocks
Desired lamella inclination*
- 60°
- 55°
- 50°
- 45°
Desired lamella spacing (mm)
Please enter a number from 0 to 300.
Desired lamella width*
- 1 m
- 1,22 m
- 1,5 m
Estimated total projected area (m²)
Estimated length of block required (m)
Length given for the selected width

There are many other parameters that need to be checked to ensure the proper design of lamella blocks. We will contact you to evaluate your request. One essential piece of data concerns the settling speed (or Hazen speed). To determine it easily, just follow this little tutorial!
Option for lamella blocks*
- Socket and weir channel DN 110
- Socket and weir channel DN 160
- No weir channel
Projet's name*
Destination country*
Country in which the equipment will be installed
Contact
First Last
Phone number
E-mail*
Phone
This field is for validation purposes and should be left unchanged.

Home
Learn
Tools
Contact

Shopping Cart

Legal
Press
Terms of use

Nous utilisons des cookies pour vous garantir la meilleure expérience sur notre site web. Si vous continuez à utiliser ce site, nous supposerons que vous en êtes satisfait.OK

Design form:

Lamella block

Step 1 of 2

Project information

Characteristics of the lamella blocks

Step 1 of 2

Project information

Characteristics of the lamella blocks