The CF-M.DL-L clariflocculator is a package combining neutralization, coagulation, flocculation and lamellar settling. This standardized equipment is available with many customization options: position of inlets and outlets, type of connections, type of stirrers… For an accurate quotation and a 3D plan adapted to your project, we kindly ask you to fill in the design form on this page. << Click to view the clariflocculator design form
Reduce the footprint of your drinking water or industrial watertreatment installations with the CF-M.DL-L clariflocculator and its physicochemical treatment process. This structure, intended for a building, with a total volume of 8 m³, consists of a coagulation tank, another for flocculation, and a lamellar settler of 39 m². Thanks to the formation of flocs, this package allows, among other things:
elimination of suspended solids and colloids
the agglomeration of silts and clays
precipitation of heavy metals and phosphorus
You will find below some characteristics specific to the clariflocculators of the 1h2o3 range and the advantages of the CF-M.DL-L:
Benefits of clariflocculation technology
Advanced technology: clariflocculation is the combination of several processes including coagulation-flocculation, decantation and sludge thickening, all using a clariflocculator.
Reduced footprint: clarifloculation technology enables water to be treated over a smaller surface area, thanks to its increased settling speed.
Elimination of phosphorus and suspended solids: clariflocculation also enables a partial reduction in COD and BOD5.
Easy to operate: once the correct dosages have been set, the clariflocculator works continuously and only needs a small amount of operation
Specific advantages of 1h2o3 clariflocculators
Custom-made: All our clariflocculators are custom-made so that you can adapt them to your specific needs (position and type of inlets/outlets, volumes of neutralization/coagulation/flocculation tanks).
High resistance: Our clariflocculators are made of corrosion-resistantpolypropylene and can withstand the full pH range.
Drinking water compliance: Some countries require specific materials for drinking water applications (NSF-61, ACS, DVGW, SVGW, etc.). We can adapt the materials of our clariflocculators to meet your specific regulations.
Internal bypass: when the volume is separated into two compartments, each of them can be isolated by an internal bypass device (except CFC.DLC). It is therefore possible to operate only on one tank while the other is being emptied, for example.
3 installation methods: thanks to the thickness of the polypropylene walls, the tanks can be installed fully buried, partially buried or simply placed on a slab.
Outdoor use: to save factory floor space, the tanks can be fitted with anti-slip covers and their walls reinforced with an anti-UV treatment.
Reinforcing the bottom of tanks: some very sandy waters have a very high abrasive power. In this case, the reinforcement of the bottom of the tank with a very hard material is recommended.
Eco-design: Unlike fiberglass, all the materials used in our equipment are 100% recyclable.
Specific industrial applications: Triple-layer tanks, high-temperature fluids… Anything is possible—just ask us!
Industrial water storage: The bottom of the lamella clarifier can be used to store treated water. It is useful when you have a strainer to feed at the head of the plant for example or to carry out a chlorination.
Lamella thickness: while many suppliers offer lamellas with a thickness <1,5 mm, Our lamellas are 3 mm thick. This thickness makes the structure much more resistant to clogging due to lack of maintenance and prevents the risk of collapse.
Smoothed anti-clogging lamellae: All our clariflocculators are equipped with smoothed PVC lamellae, allowing a better sedimentation and offering a self-cleaning effect
Separate collection of floating sludge: Our dual-channel collection troughs allow the separate collection of:
Settled water: the treated water
floating sludge: the fraction floating on the surface of lamellar decanters which, if not collected separately, reduces the elimination yields for TSS, COD and BOD5.
Stirrers:
0,37kW, IP55, 3×400 V Motors
Rotation speed can be adjusted according to your instructions
Lamellae block:
Lamellae thickness: 3 mm
Horizontal lamellae spacing: 45 mm
Inclination: 60°.
Spacing between lamellae at 60°: 39 mm (optional)
Lamellae surface area: 1 m²
Twin weir channel with siphonic partition:
Treated effluent weir channel collection.
Floating weir channel collection.
Inlets and outlets
Water inlet d160: can be either left-facing (as shown) or right-facing
Clean water outlet d110 opposite inlet: either on the right (as shown) or on the left.
Safety overflow d160: either left or right (as shown)
Floating sludge outlet d110: either on the right (as shown) or on the left
Sludge outlet d63: either on the right (as shown) or on the left
Lamellae:
Flat 3 mm thick PVC. For drinking water applications, we use materials that comply with the regulations you specify (PE 100 for ACS).
Supports: 316L stainless steel
Weir channel:
Polyethylene
Stirrers:
All the parts in contact with the liquid: stainless steel 316L
Connections:
PVC/ PP
Structure:
Internal and sole: 20 mm polypropylene
External: polypropylene foam >50mm
Stainless steel hood and cylinders.
Separate stirrers supply
If you have your favorite brand of stirrer you want to install yourself, you will get a discount for the 2 stirrers.
If you only want a large stirring tank, then you can order only one stirrer.
Installation of the clariflocculator
Customised industrial water storage.
Lamella spacing as needed (base = 39 mm)
All entrances and exits can be equipped with :
connection up to d63
of adhesive/flange: diameter at choice
Sludge evacuation
Floating sludge (which has to be removed periodically):
Connection of a solenoid valve to remove floating sludge
On the clarifier frame for DL versions
inside a PP box for the DLE version
Available at any time:
Pictures of completed installations
2D/3D Images
Technical data sheets
Given on delivery :
EC certificate or declaration of incorporation *
Leakage test report *
Assembly instructions
Operating Manual
Technical details *
List of spare parts and supplies *
* If applied
Shipping
All over the world, 1h2o3 packages have dimensions compatible with transport in HC containers.
Delays
10 to 14 weeks.
Once the order has been placed, the above-mentioned period runs (excluding weeks 31 to 34 and 51 to 52) from the date of receipt of payment and validation of the project plan (including all the options requested in the case of special needs). As soon as the equipment is ready, it will be shipped to you. A road transport requires approximately one week to set up, it can take up to 3 weeks for a container depending on the destination.
Nous utilisons des cookies pour améliorer votre expérience et mesurer l’audience.
Fonctionnel Always active
L’accès ou le stockage technique est strictement nécessaire dans la finalité d’intérêt légitime de permettre l’utilisation d’un service spécifique explicitement demandé par l’abonné ou l’utilisateur, ou dans le seul but d’effectuer la transmission d’une communication sur un réseau de communications électroniques.
Préférences
L’accès ou le stockage technique est nécessaire dans la finalité d’intérêt légitime de stocker des préférences qui ne sont pas demandées par l’abonné ou l’internaute.
Statistiques
Le stockage ou l’accès technique qui est utilisé exclusivement à des fins statistiques.Le stockage ou l’accès technique qui est utilisé exclusivement dans des finalités statistiques anonymes. En l’absence d’une assignation à comparaître, d’une conformité volontaire de la part de votre fournisseur d’accès à internet ou d’enregistrements supplémentaires provenant d’une tierce partie, les informations stockées ou extraites à cette seule fin ne peuvent généralement pas être utilisées pour vous identifier.
Marketing
L’accès ou le stockage technique est nécessaire pour créer des profils d’internautes afin d’envoyer des publicités, ou pour suivre l’utilisateur sur un site web ou sur plusieurs sites web ayant des finalités marketing similaires.