Sealing nut and washer.

The BioUV sealing nut and protective washer ensure reliable sealing around the quartz sleeve and secure assembly of the UV reactor, while protecting the internal components from moisture and corrosion. . Compatibility UV10 to UV40.
  • UV10 to UV40
  • UV170 to UV340
  • Range UV HO to FW HO
TransportExpress delivery by road or air
Price range: € 32.00 through € 181.00 HT

Selon le biomédia choisi · 1 conditionnement = 1,25 m³

- +

*Délai de livraison à confirmer pour votre commande.

Designed to ensure reliable sealing between the quartz sleeve and the UV reactor, this assembly prevents water leaks, moisture ingress, and corrosion of internal components. Simple to install and highly robust, it is an essential part for ensuring the performance and safety of your UV-C disinfection system.

Maintenance of the sealing nut and protective washer.

Before carrying out any work, please:

  1. Completely disconnect the power supply and shut down the system before carrying out any work.
  2. Drain the reactor section if necessary to avoid any splashing or risk of the quartz sleeve being forced out.
  3. Remove the nut and washer only once the system is free of pressure; proper handling is crucial to prevent leaks and ensure the safety of the unit.

During reassembly, make sure the O-ring is new, the nut is properly tightened, and the washer is clean: any failure to do so may compromise the system’s sealing, performance, and service life.

When should you replace?

To ensure optimal sealing and prevent any leaks, it is recommended to replace the sealing nut and washer during each major maintenance operation or whenever the reactor is opened for lamp or quartz sleeve replacement.
Regular visual inspection is recommended: any crack, deformation, thread wear, or hardening of the seal requires immediate replacement.
Always use original BioUV parts to preserve the safety, compatibility, and performance of your UV system.

How is the maintenance operation for the sealing nut carried out?

Materials needed:

    • New sealing nut.
    • New protective washer.
    • BioUV-compatible O-ring.

Before carrying out any work, make sure the system is shut down, powered off, and depressurized.
Access to the nut and washer is located at the quartz sleeve passage.

  1. Drain the reactor if necessary and remove the quartz sleeve.
  2. Unscrew the old nut and remove the worn washer.
  3. Carefully clean the seal seat and the contact area.
  4. Position the new washer, then screw on the new sealing nut without overtightening.
  5. Reinstall the quartz sleeve and make sure there are no leaks before restarting the system.

Preventive replacement during major maintenance operations helps ensure the longevity, safety, and compliance of your Bio-UV system.

How should the sealing nut and washer be recycled?

After replacement, clean and dry the parts.

  • Separate the materials:
    the metal nut should go to the metal recycling stream, and the washer (plastic/PTFE/nylon depending on the model) should go to the industrial plastics recycling stream.
  • The used O-ring (elastomer) should be disposed of in the non-recyclable waste stream, in accordance with local regulations.

If your supplier offers a take-back program, place the parts in a clean package, label it “Recycling,” and follow the return procedure.

  • Pools
  • Spa
  • Freshwater aquariums and ornamental ponds
  • Aquaponics
  • Aquaculture / freshwater fish farming
  • More generally, all fresh, clear waters containing less than 20 mg/L of suspended solids, NTU < 1, and iron < 0.1 mg/L

For these applications, the sealing nut and its protective washer play an essential role.
They ensure a perfect seal around the quartz sleeve passage, protect the components from splashes and moisture, and contribute to the overall reliability of the UV reactor.
A properly assembled system, with the nut, seal, and sleeve in good condition, ensures optimal and long-lasting UV disinfection of the water.

Benefits of Bio-UV sealing nuts

  • Enhanced sealing: ensures perfect isolation between the quartz sleeve and the reactor, preventing any water ingress.
  • Long-lasting protection: preserves internal components against moisture, corrosion, and splashes.
  • Secure installation: robust design ensures reliable fastening even under pressure.
  • High-quality materials: made from durable materials resistant to temperature variations and UV-treated water.
  • Easy maintenance: simple to remove for inspection, cleaning, or quick replacement.
  • Full compatibility: genuine Bio-UV part designed for all product ranges, ensuring perfect compatibility and extended system lifespan.

Available at any time:

Delivered with: Assembly instructions

Delivery
Shipping is free for all orders over 1200€ in CE. For any order under 250€, an administration fee of 35€ will be charged. When placing the order, please indicate where you would like to have your order delivered.
To qualify for a VAT exemption, companies from EC member countries must provide the name and company and their VAT number.

Delays

  • One week.

Once the order has been placed, the above-mentioned period runs (excluding weeks 31 to 34 and 51 to 52) from the date of receipt of payment and validation of the project plan (including all the options requested in the case of special needs). As soon as the equipment is ready, it will be shipped to you. Road transport requires an average of one week to set up, it can go up to 3 weeks for a container depending on the destination.
Please refer to the supplier’s specific terms and conditions for more information.

Receipt

Upon receipt of the package, in case of damage or missing, you must do :

  • To the carrier: immediate observation and confirmation of reservations by registered letter with acknowledgement of receipt, within 3 days of receipt of goods.
  • To the supplier: complaints about apparent defects or non-conformity of the product delivered with the product ordered or with the delivery note, must be made in writing within 3 days of the arrival of the product.

Please refer to the supplier’s specific terms and conditions for more information.

Returns
Any return of items deemed new by the customer must be made within two weeks of receipt.
Any return of products must be the subject of a formal agreement between the seller and the buyer.
Any product returned without this agreement will be made available to the buyer and will not give rise to a credit note. The costs and risks of the return are always the responsibility of the buyer.*
Please refer to the supplier’s specific terms and conditions for more information.

Shopping Cart