MBBR Outdoor NE-S

Outdoor MBBR NE-S – Eligible for lease with purchase option! Turnkey biological treatment with MBBR technology: Peak flow rate: 5 m³/h.
  • Peak flow rate: 5 m³/h
  • Removes up to 19 kg of COD per day, achieving 90% removal efficiency at 25°C
  • Total volume : 3,85 m3
Total volume3,85 m3
Surface area1500 m².
Dimensions L x P x H1364 x 2300 x 2290
TransportBy container, Tautliner or tray truck
Type of installationOutdoor

Selon le biomédia choisi · 1 conditionnement = 1,25 m³

*Délai de livraison à confirmer pour votre commande.

MBBR (Moving Bed Biofilm Reactor) technology uses bacterial carrier media, also known as moving bed biofilm media, which provide a large surface for beneficial bacteria to grow and are widely used in wastewater treatment plants. Like a lego, BOXes technologies are assembled to create your custom treatment process.

To determine the size of MBBR tanks for a wastewater treatment plant, we must consider the incoming loads and the desired treatment objectives. La température de l’eau impacte aussi le dimensionnement, plus l’eau est chaude et plus les bactéries seront performantes.

For an accurate quotation and a 3D plan adapted to your project, please fill in the design form on this page.
<< Please select the button to display your MBBR design form

Depending on the effluent discharge standards, the water alkalinity, and other process parameters, the following treatment stages can be integrated with MBBR technology:

  • pre-denitrification
  • nitrification
  • denitrification
  • recirculation
  • degassing
  • Post-denitrification

You will find below some characteristics of the MBBR NE-S of the 1h2o3 range and its advantages:

Benefits of MBBR technology

  • Highly efficient treatment: MBBR technology is based on the biofilm principle, using microorganisms to biologically treat wastewater.
  • Reduced footprint
  • high tolerance to load variations:fixed cultures are more resistant in biofilm form, and are more resistant to hydraulic and organic load shocks. Attached to their supports, they are not “washed away” during storms.
  • Easy to operate: MBBR technology is operated just like an activated sludge plant.
  • Strong biological system :

    • To toxic shocks
    • To fluctuating flows
    • To variable costs

Specific benefits of 1h2o3 MBBRbox

  • Custom made: All our MBBRs are custom made so that you can adapt them to your specific needs
  • Prefabricated packages: Turnkey package solutions have been developed to meet the stability requirements in all possible configurations
  • Compactness: with their large surface area, our MBBR holders treat 3x more pollution in the same volume.
  • Cost-effectiveness:the more compact it is, the lower the construction costs!
  • Function without agitators: thanks to their high solubility, the supports do not require agitators or over-ventilation to set them in motion (unlike those that float). The power consumption is reduced to a minimum.
  • Durability: Unlike rigid plastic media, the foam carriers absorb impacts and do not break into small pieces, significantly reducing attrition.
  • High resistance: Our MBBRs have a high mechanical and chemical resistance
  • 3 installation methods: thanks to the thickness of the polypropylene walls, the tanks can be installed completely underground, partially underground (1.10 m overhang) or simply placed on a slab.
  • Outdoor use: for outdoor installations, the BOXes can be equipped with an insulating, non-slip, waterproof hood and a carbon filter for deodorization.
  • COD and BOD₅ removal: An MBBR process using our carrier chips can achieve high carbon removal performance, including soluble BOD₅ (sBOD₅).
    < 5,0 mg/L with sDCO >95%
  • high tolerance to load variations:fixed cultures are more resistant in biofilm form, and are more resistant to hydraulic and organic load shocks. Attached to their supports, they are not “washed away” during storms.
  • Simplicity of operation: MBBR technology operates just like an activated sludge plant and requires minimal maintenance
  • Protected area for biofilm growth:Approximately 2600 m2/m3 ± 4 % (792 ft²/ft3)
  • Shape and Size: Cube-shaped holder with a nominal dimension of 20 mm x 20 mm and a thickness of 7 mm (0.78 x 0.78 x 0.27″). Small differences in measurements may be observed between individual rooms, but this does not influence performance.
  • Dry weight: 26-28 kg/m3. Wet bulk weight: 50-95 kg/m3
  • Porosity:90% to 95%.
  • Density: Ajustable. For most of the applications, the support exists in 1.04-1.1 density. The density allowance is ±0.02 kg/dm3.
  • Water absorption: Approximately 250% (by weight).
  • Microbial colonization:About 120 – 180 min
  • Contents:Porous, flexible and durable cubes made of hydrophilic Polyesther in PU foam impregnated with activated carbon powder.
  • Security: Harmless and neutral.
  • Municipal sewage plants
  • Compact system in container
  • Aquaculture / Fish Farming
  • Hôtels, resorts, campings
  • Paper industry
  • Agribusiness
  • Chemical and pharmaceutical industry
  • Petroleum industry

Available at any time:

    • Pictures of completed installations
    • 2D/3D Images
    • Technical data sheets

Given on delivery :

    • EC certificate or declaration of incorporation *
    • Leakage test report *
    • Assembly instructions
    • Operating Manual
    • Technical details *
    • List of spare parts and supplies *

* If applied

Shipping

All over the world, 1h2o3 packages have dimensions compatible with transport in HC containers.

Delays

    • 10 to 14 weeks.

Once the order has been placed, the above-mentioned period runs (excluding weeks 31 to 34 and 51 to 52) from the date of receipt of payment and validation of the project plan (including all the options requested in the case of special needs). As soon as the equipment is ready, it will be shipped to you. A road transport requires approximately one week to set up, it can take up to 3 weeks for a container depending on the destination.

Shopping Cart