DIP 21 / 4VV – 2.2 to 3 kW (3 to 4 HP)
Nouveau
  • FeatureImage
  • gallery1
  • gallery2
  • gallery3

DIP 21 / 4VV – 2.2 to 3 kW (3 to 4 HP)

 22 950.00 HT

  • Three-phase squirrel-cage motor 50Hz / 60Hz
  • IE2 standard-compliant gold IE3
  • Class F
  • IP56 as standard and “floodable” IP57 or
    “immersible” IP67 available on request
  • Interior channel diphasic Vortex-effect
    hydraulics or DIPCUT® Impeller
  • Oil-free motor shaft seal, large capacity
  • Fan cooling
  • Max ambient temperature: + 40 ° C (104 ° F).
  • HotLine 24/7
  • Warranty 3 years
  • Delivery: 6 weeks ExWorks.
Catégorie :
000

Direct in-line pump system DIP 21 / 4VV for lift stations

All the lift stations require a wet well, but this is not a standard lift station :
it does not have a wet well

You have here the following advantages:
• SAFETY : No Exposure to H2s – No effluent stored around Confined space
• ENVIRONMENT : No Odors around, No Corrosion, No Pollution, No grit removal, No trash removal, much less Detention Time and No regularly cleaning
• Working Comfort : No Fat / Sand/ Wipes accumulation. No dirty Job or much easier
• CONSTRUCTION COST : Less Depth digging, No Additional valves vault, Simple design
• REHAB Existing Stations : Transform any Wet Well in Clean, dry, safe station.
• ENERGY Saving : Less Elevation ; No priming problems (if systems above).
• MORE POSSIBILITIES : Nothing above ground, Standard ventilation, Standard lighting inside..

STAINLESS STEEL POLE

Adjustable stainless steel base with safety railing, stainless steel mounting fixtures for the DIP and
stainless steel anchoring studs.

KNIFE GATE VALVE DN150

Stainless steel input shut off valve in cast iron housing DN150.
Operated by hand wheel

SWING CHECK VALVES DN100

Cast iron GS40. Valve coated with ethylene propylene diene monomer (EPDM) and 200 micrometer
epoxy based paint

CAST IRON DISCHARGE VALVES DN100

Rubber plug in cast iron housing GS50, with 250 micrometer epoxy based paint
Operated by hand wheel

Reviews(0)

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

  • INLET -> 150 (6’’)
  • OUTLET -> 100 (4’’)
  • H1 -> 349 (13.7’’)
  • H2 -> 256 (10.1’’) max.
  • L -> 56 (29.8’’)
  • P -> 680 (26.8’’)
RATED POWERSPEED (up to)VOLTAGEMAX CURRENTINLETOUTLETø CHANNELWEIGHT
2.2 kW / 3 HP1800 rpm380-480V5.15A150 (6 ‘‘)100 (4 ‘‘)70 (2.8 ‘‘)117 kg/258 lb
3 kW / 4 HP1800 rpm380-480V6.7A150 (6 ‘‘)100 (4 ‘‘)70 (2.8 ‘‘)130 kg/287 lb
preloader