Skip to content

About us
Our technology
Shop
Tools
Learn
Contact

Quote
0

Search for:

Form:

Lamella clarifier design

Step 1 of 3

33%

Project information
What is the peak flow in m3/h*
Enter the peak flow rate here
How would you like to choose the Hazen speed to be used?
- By selecting a type of water to be treated
- By specifying the speed of Hazen, I know it
What type of water is being treated?
- Low concentration sludge (from a biodisk for example)
- Physico-chemical sludge (generally from a coagulation and flocculation stage)
- Drinking water (usually to separate coagulated particles)
- Rainwater (collected by the roof for example)
Desired Hazen speed
Usually inferior to 1, use the comma (ex : 0,4)
Projected area required in m2
Preferred language
- French
- English
Projected area required in m2
Tell us more about your project:
Highest temperature of the water to be treated (in degrees °C)*
Please enter a number from 0 to 60.
Choosing the type of monobloc clarifier you are thinking of
- CSD
- DLM-S, DLME-S, DLH-S or DLHE-S
- DLM-M, DLME-M, DLH-M or DLHE-M
- DLM-L, DLME-L, DLH-L or DLHE-L
Number of required units

Settings and options
Installation of the clarifier*
- Indoor: protected from UV rays and bad weather
- Outdoor
Sludge evacuation*
- Gravity, at the bottom of the structure
- By pumping, at the top
- Both: pumping and draining
Gravitational: you have to connect a pump or a solenoid valve at the outlet. If you want a pumping, the clarifier will be delivered with a submerged pump connected to the upper part of the clarifier
Solenoid valve for removal of floating sludge*
- Yes
- No
Floating sludge should be flushed out periodically. A solenoid valve can be delivered assembled on the clarifier
Strengthening the bottom of the clarifier*
- Yes
- No
Some sand waters are highly abrasive. In this case, a stronger bottom of the clarifier may be preferable.
Feeding of the clarifier*
- Gravity: d160
- By pumping: collar mandatory, DN at choice
How does the water get into the clarifier?
Process water storage*
- Yes
- No
Would you like to create an opening at the bottom of the clarifier to use the industrial water volume?
Automatic lamella cleaning*
- Yes
- No
It is required to clean the lamella of the lamella clarifiers. To save time, an air pipe can be added under the lamella.
OPTION collars
- Alimentation (d160)
- Sludge evacuation by pumping (d63)
- Emptying the bottom of the structure (d63)
- Treated water outlet (d110)
- Floating sludge outlet (d110)
Instead of a single exit, do you prefer snares to these entrances and exits? Check if needed.

Projet's name*
Destination country*
Country in which the equipment will be installed
Contact
First Last
E-mail*

Just leave your email, and I will quickly send you a quote for your project and a summary of your request
Hidden
Estimated price (€)
Phone
This field is for validation purposes and should be left unchanged.

Quote
0

Home
Shop
Learn
Tools
Contact

Shopping Cart

Copyright © 2023 1 H2O 3

Legal
Press
Terms of use

Nous utilisons des cookies pour vous garantir la meilleure expérience sur notre site web. Si vous continuez à utiliser ce site, nous supposerons que vous en êtes satisfait.OK