UV Lamp

 89,00 140,28 HT

Supplied with its O-ring ! 13000 hours lifetime!

UV water disinfection lamps for the BioUV and REUT ranges

  • REUT S, M, L, XL reactor
  • UV10, UV20, UV30, UV40
  • UV170, UV250, UV 340
  • UV3000 HO; UV3205 HO; UV4205 HO; UV5205 HO; UV6205 HO;
  • UV6273 HO
  • UV HOME 2, 3, 4, 6, 9
  • Delta UV type E ou ES 5, 10, 15, 20, 40
  • IBP 10HO+; IBP 30HO+; IBP 40HO+; IBP 2150HO+; IBP 3150HO+; IBP 4205HO+; IBP 5205HO+
Clear
SKU: uvc-lamp Category:

UV lamp for disinfection

UV lamps are the heart of the UVC disinfection system. Each UV lamp can disinfect up to several hundred liters per minute, depending on the quality of the water to be treated. Conventional low pressure UV lamps made of quartz glass offer excellent efficiency. 90% of the electrical power can be used as 254 nm UVC radiation to disinfect water.

UV lamp maintenance

Before any intervention, remember that :

  1. UV lamp should be recycled in accordance with your country’s regulations. Do not dispose of them in ordinary or industrial waste, as they contain mercury particles.
  2. When replacing a UV lamp, do not put your fingers on the glass. Cleaning the lamps with alcohol will remove any traces.
  3. The light produced by a UV lamp must be carefully protected from direct or indirect view.

When replacing the UV lamp, be careful not to put your fingers on the glass. Cleaning the lamps with alcohol will remove any fingerprints.

When should I replace it?

It is advised to replace the UV lamp after 13,000 hours of service, to maintain the guarantee of a sufficient level of irradiation. This can be done at the same time as replacing the Quartz UV sleeves (if they are damaged). When the sheaths are properly maintained, experience shows that a replacement every two lamps is sufficient (here every 26000 hours / 3 years for example)

So how does the maintenance of UV lamps work?

Materials needed:

After shutting down and securing your installation, you only need to remove the connector part to access the UV lamps.

  1. Remove the old UV lamp and its O-ring
  2. Replace the quartz sleeve if necessary
  3. Install the new lamp
  4. Position the new O-ring
  5. Reattach the connector part

How to recycle UV lamps?

It’s easy! Simply place the old UV lamp in the new lamp package and, for those using original Bio UV reactors, write “recycling” and ship your used lamps to an approved recycling facility.

  • Pools
  • Spas
  • Aquariums and freshwater ponds
  • Aquaponics
  • Freshwater aquaculture / fish farming
  • Usually, all fresh and clear waters containing less than 20 mg/L of TSS, NTU < 1, and iron < 0.1 mg/L

Germicidal UV lamp efficiently disinfects water. This compact solution offers protection against leakage, temperature fluctuations, fouling and breakage. A UV disinfection reactor with good quartz UV sleeves prevents environmental risks over time.

  • UV lamps from the latest technologies with High Intensity (HO) performance
  • High durability of the lamps (13 000 hours depending on the number of times they are switched on)
  • High efficiency
  • Low energy consumption
  • UV lamps adapted to your needs (see UV disinfection design section)
  • Maintenance: very quick and easy lamp change

Réacteur désinfection UV eau douce gamme UV10 UV20 UV30 UV40 1h2o3

Réacteur compact de désinfection UV eau douce gamme UV170 UV250 UV340 1h2o3

Réacteur de désinfection UV eau douce gamme UV3000HO UV3205HO UV4205HO UV5205HO UV6205HO UV6273HO 1h2o3

Available at any time:

Supplied with the delivery: Assembly guide

Delivery
Shipping is free for all orders higher than 1200€ in CE. For orders under 250€, an administrative fee of 35€ will be charged. When placing your order, please indicate where you would like your order to be delivered.
To benefit from a VAT exemption, companies from EC member countries must indicate the company name and VAT number.

Delivery times

  • One week.

Once the order has been placed, the above-mentioned time period starts (except for weeks 31 to 34 and 51 to 52) from the date of receipt of payment and validation of the project plan (including all the options requested in the case of special requests). As soon as the equipment is ready, it will be shipped to you. Road transport requires an average of one week for set-up, it can take up to 3 weeks for a container depending on the destination.
Please refer to the supplier’s specific terms and conditions for more information.

Receipt

Upon receipt of the package, in case of damage or shortage, please make :

  • To the transporter: Immediately any necessary observation and to confirm its reserves by registered letter with acknowledgement of receipt, within 3 days following the reception of the goods.
  • To the supplier: claims on apparent defects or non-conformity of the delivered product to the ordered product or to the shipping note, must be made in writing within 3 days of arrival of the product.

Please refer to the supplier’s specific terms and conditions for more information.

Returns
All returns of items considered new by the customer must be returned within two weeks of receipt.
All product returns must be formally agreed upon between the seller and the buyer.
Any product returned without this agreement will be held at the disposal of the buyer and will not give rise to the establishment of a credit note. The costs and risks of return are always at the buyer’s expense.
Please refer to the supplier’s specific terms and conditions for more information.

Shopping Cart
preloader