Ecrou et rondelle bioUV 1h2o3

UV bulbs (Copie)

Price range: € 29,36 through € 167,68 HT

The UV disinfection lamp is at the heart of the UVC treatment: it emits at 254 nm for an immediate germicidal action. The low-pressure quartz glass versions offer excellent efficiency, up to 90% of the power converted into useful UVC.

Compatibility

  • REUT reactors: S, M, L, XL
  • BioUV: UV10, UV20, UV30, UV40, UV170, UV250, UV340
  • UV3000 HO, UV3205 HO, UV4205 HO, UV5205 HO, UV6205 HO, UV6273 HO
  • UV HOME: 2, 3, 4, 6, 9
  • Delta UV: Type E or ES 5, 10, 15, 20, 40
  • IBP: IBP 10HO+, 30HO+, 40HO+, 2150HO+, 3150HO+, 4205HO+, 5205HO+
  • The entire DW drinking water range

Features

  • UVC emission 254 nm with germicidal effect
  • High efficiency (up to 90% effective UVC)
  • Low-pressure quartz glass technology
  • Comes with O-ring for quick installation
  • Typical lifespan: ≈ 13,000 h
- +
SKU ecrou Category

UV bulbs for disinfection

UV bulbs are at the heart of the UVC disinfection system. Each UV bulb can disinfect up to several hundred liters per minute, depending on the quality of the water to be treated. Conventional low-pressure UV lamps made of quartz glass offer excellent efficiency. 90% of the electrical power can be used as 254nm UVC radiation to disinfect water.

UV bulb maintenance

Before any intervention, remember that :

    1. UV bulbs must be recycled according to your country’s regulations. Do not throw them in the regular or industrial waste, as they contain mercury particles.
    2. When replacing a UV lamp, you should not put your fingers on the glass. Cleaning the lamps with alcohol will remove any traces.
    3. The light produced by a UV bulb must be carefully protected from direct or indirect prying eyes.

When replacing the UVC lamp, be careful not to put your fingers on the glass. Cleaning the lamps with alcohol will remove any finger marks.

When should you replace?

It is recommended to replace UV bulbs after 13000 hours of operation, to maintain the guarantee of a sufficient level of irradiation. This replacement can be done at the same time as that of the UV Quartz sheaths (if they are damaged). When the sleeves are properly maintained, experience shows that a replacement every two lamps is sufficient (here every 26000 hours / 3 years for example)

How does the maintenance of UV bulbs work?

Materials needed:

After shutting down and securing your installation, all you have to do is remove the connector part to access the UV lamps.

  1. Remove the old UV lamp and are O-ring
  2. Replace the quartz sleeve if necessary
  3. Mount the new lamp
  4. Position the new O-ring
  5. Reattach the connector part

How to recycle UV bulbs?

That’s easy! Place the old UV lamp in the packaging of the new lamp and, for those using original Bio UV reactors, write “recycling” and then ship to have your used lamps reprocessed at an approved recycling facility.

  • Pools
  • Spa
  • Freshwater aquariums and ornamental ponds
  • Aquaponics
  • Aquaculture / freshwater fish farming
  • More generally, all fresh, clear waters containing less than 20 mg/L of suspended solids, NTU < 1, and iron < 0.1 mg/L

Germicidal UV bulbs disinfect water effectively. This space-saving solution offers protection against leakage, temperature fluctuations, fouling and breakage. A UV disinfection reactor with good UV quartz sheaths prevents environmental risks over time.

  • UV bulbs from the latest technologies with High Intensity (HO) performance
  • Very long lamp life (13,000 hours depending on the number of times the lamp is turned on)
  • High performance
  • Low power consumption
  • UV lamps adapted to your needs (see the UV disinfection sizing section)
  • Maintenance: easy and quick to change the lamp

UV Fresh Water Disinfection Reactor UV10 UV20 UV30 UV40 1h2o3

Compact UV Fresh Water Disinfection Reactor UV170 Range UV250 UV340 1h2o3

Fresh Water UV Disinfection Reactor, UV3000HO UV3205HO UV4205HO UV5205HO UV6205HO UV6273HO 1H2O3

Available at any time:

Delivered with: Assembly instructions

Delivery
Shipping is free for all orders over 1200€ in CE. For any order under 250€, an administration fee of 35€ will be charged. When placing the order, please indicate where you would like to have your order delivered.
To qualify for a VAT exemption, companies from EC member countries must provide the name and company and their VAT number.

Delays

  • One week.

Once the order has been placed, the above-mentioned period runs (excluding weeks 31 to 34 and 51 to 52) from the date of receipt of payment and validation of the project plan (including all the options requested in the case of special needs). As soon as the equipment is ready, it will be shipped to you. Road transport requires an average of one week to set up, it can go up to 3 weeks for a container depending on the destination.
Please refer to the supplier’s specific terms and conditions for more information.

Receipt

Upon receipt of the package, in case of damage or missing, you must do :

  • To the carrier: immediate observation and confirmation of reservations by registered letter with acknowledgement of receipt, within 3 days of receipt of goods.
  • To the supplier: complaints about apparent defects or non-conformity of the product delivered with the product ordered or with the delivery note, must be made in writing within 3 days of the arrival of the product.

Please refer to the supplier’s specific terms and conditions for more information.

Returns
Any return of items deemed new by the customer must be made within two weeks of receipt.
Any return of products must be the subject of a formal agreement between the seller and the buyer.
Any product returned without this agreement will be made available to the buyer and will not give rise to a credit note. The costs and risks of the return are always the responsibility of the buyer.*
Please refer to the supplier’s specific terms and conditions for more information.

Related products

Shopping Cart
preloader