UV disinfection reactors for corrosive water
This range of specific reactors for UV disinfection of corrosive and/or salty water meets the most stringent requirements of professionals and thus optimizes their operations in complete safety. The high density polyethylene (HDPE) reactors are not only suitable for the disinfection of sea water. Thanks to their impact and corrosion resistant composition, they offer an excellent quality/price ratio while guaranteeing a very high quality of water.
HDPE is very suitable for UV disinfection of corrosive water. It is an inert material widely used in the food industry. It is distinguished by its high chemical resistance and good rigidity. Its temperature range is from -50°C to +80°C, which distinguishes it from polypropylene (PP), which becomes brittle below 10°C. HDPE is an excellent material for mixtures of acids, bases or solvents.
Many professionals prefer HDPE reactor-based systems, even for non-corrosive media.
How UV disinfection for corrosive water works
UV disinfection systems for corrosive water are compact and produce an extremely fast treatment. Ultraviolet light mutates and/or degrades DNA. When DNA is damaged, the organism becomes unable to function because its “instructions” are scrambled or missing. An organism that has no instructions cannot function and reproduce, and cannot cause infection. It is rendered harmless and eventually dies.
Elimination of the bacterial risk on the farm
In UV disinfection systems, water is purified by passing through an HDPE chamber (also called a “reactor”) that contains one or more special UV-producing lamps. As the water passes the lamp, the UV-C penetrates the DNA and disrupts the metabolism of the cells until they are completely destroyed. Viruses, bacteria, algae, yeasts, molds… all germs are inactivated (including Legionella and Cryptosporidium). Moreover, this technology has the enormous advantage of not generating any disinfection by-products, which further protects the environment and aquatic life.
Under normal use conditions:
- 2 years, for the HDPE reactor (materials and welds)
- 2 years for all components except the UV lamp and the quartz sleeve (consumable).
Please refer to the supplier’s specific terms and conditions and user manual for more information.
Excluded:
Defects and damage caused by natural wear and tear, external accidents, wrong assembly, improper maintenance, irregular use, inadequate storage, non-respect of the expiration date, intervention by a third party, or modification of the product not provided for or specified by the seller, are excluded from the warranty.
Please refer to the supplier’s specific terms and conditions for more information.
HDPE UV disinfection systems for corrosive water are designed according to the flow rate: it is the result of the combination of the contact time in the reactor, the power of the lamp(s), and the consideration of the specific transmittance of salt water (85% – lower than fresh water) that guarantees a dose (expressed in millijoules per centimeter – mJ/cm2) necessary and sufficient for the eradication of 99.9% of the microorganisms (bacteria, viruses, suspended algae,…) Translated with www.DeepL.com/Translator (free version)
Available at any time:
Delivered with: Assembly instructions
Delays
Once the order has been placed, the above-mentioned period runs (excluding weeks 31 to 34 and 51 to 52) from the date of receipt of payment and validation of the project plan (including all the options requested in the case of special requests). As soon as the equipment is ready, it will be shipped to you. A road transport requires approximately one week to set up, it can take up to 3 weeks for a container depending on the destination.
Please refer to the supplier’s specific terms and conditions for more information.
Receipt
Upon receipt of the package, in case of damage or missing, you must do :
- To the carrier: immediate observation and confirmation of reservations by registered letter with acknowledgement of receipt, within 3 days of receipt of goods.
- To the supplier: complaints about apparent defects or non-conformity of the product delivered with the product ordered or with the delivery note, must be made in writing within 3 days of the arrival of the product.
Please refer to the supplier’s specific terms and conditions for more information.
Returns
All returns of items considered new by the customer must be made within two weeks of receipt. All product returns must be formally agreed between the seller and the buyer.
Any product returned without this agreement will be held at the disposal of the buyer and will not give rise to the establishment of a credit.
The costs and risks of return are always at the buyer’s expense.
Please refer to the supplier’s specific terms and conditions for more information.