Clariflocculator CF-M.DL-M

Coagulation flocculation + lamella clarifier CF-M.DL-MAvailable for rent with purchase option!

Set up for specific industrial applications, with smooth PVC lamellae  spaced at 45 mm each and inclined at 60° to prevent the sludge from sticking to the plates. All this in a complete custom-made block, ready to use, with a choice of inlet and outlet positioning and with two compartments:

Flocculation coagulation CF-M

    • Total volume:8 m3
    • Flow divider outlet: 3 x d110
    • Coagulation vats stirrer: 200 rpm 0.37kW tri. Can be modified
    • Coagulation vats stirrer: 60 tr/min 0.37kW tri. Can be modified

Lamella clarifier DLM-M

  • Projected area: 26 m²
  • Industrial water storage: 1,68 m3
  • Sludge storage: 0.86 m3
  • Settling volume: 6 m3
  • 2 twin weir channel collection system with siphonic partition
SKU: Clarifloculateur-CF-M-DL-M Categories: ,

The CF-M.DL-M clariflocculatoris a package combining neutralization, coagulation, flocculation and lamellar settling. This standardized equipment is available with many customization options: position of inlets and outlets, type of connections, type of stirrers… For an accurate quotation and a 3D plan adapted to your project, we kindly ask you to fill in the design form on this page.
<< Click to view the clariflocculator design form

Reduce the footprint of your drinking water or industrial water treatment facilities with the physical-chemical treatment of the clariflocculator CF-M.DL-M. This structure for building, with a total volume of 8 m3, is composed of a coagulation tank, another of flocculation and a lamella clarifier of 26 m². With the formation of flocs, this package allows, among other things:

  • remove TSS and colloid
  • the agglomeration of silts and clays
  • precipitation of heavy metals and phosphorus

You will find below some characteristics specific to the clariflocculators of the 1h2o3 range and the advantages of the CF-M.DL-M:

Benefits of clariflocculation technology

  • Advanced technology: clariflocculation is the combination of several processes including coagulation-flocculation, decantation and mud thickening, all using a clariflocculator.
  • Reduced footprint: Clariflocculation technology allows water to be treated in a smaller area due to its increased settling speed.
  • Phosphorus and suspended solids removal: clariflocculation also allows a partial reduction of COD and BOD5
  • Easy to operate: once the correct dosages have been set, the clariflocculator works continuously and only needs a small amount of operation

Specific advantages of 1h2o3 clariflocculators

  • Custom-made: All our clariflocculators are custom-made so that you can adapt them to your specific needs (position and type of inlets/outlets, volumes of neutralization/coagulation/flocculation tanks).
  • High resistance: Our clariflocculators are made of corrosion-resistant polypropylene and can withstand the entire pH range.
  • Drinking water compliance: Some countries require specific materials for drinking water applications (NSF-61, ACS, DVGW, SVGW..). We can adapt the materials of our clariflocculators to meet your specific regulations.
  • Internal bypass: when the volume is separated into two compartments, each of them can be isolated by an internal bypass device (except CFC.DLC). It is therefore possible to operate only on one tank while the other is being emptied, for example.
  • 3 installation methods: thanks to the thickness of the polypropylene walls, the tanks can be installed fully buried, partially buried or simply placed on a slab.
  • Outdoor use: to save space in the factory, the tanks can be equipped with anti-slip covers and their walls reinforced by an anti-UV treatment
  • Reinforcement of the bottom of the tanks: some very sandy waters have a very important abrasive power. In this case, the reinforcement of the bottom of the tank with a very hard material is recommended.
  • Eco-design: Unlike fiberglass, all materials used in our equipment are 100% recyclable.
  • Specific industrial applications: triple skin tank, high temperature fluids… Everything is possible, just ask us!
  • Storage of industrial water: The bottom of the lamella clarifier can be used to store treated water. It is useful when you have a strainer to feed at the head of the plant for example or to carry out a chlorination.
  • Lamella thickness: while many suppliers offer lamellas with a thickness <1,5 mm, Our lamellas are 3 mm thick. This thickness makes the structure much more resistant to clogging due to lack of maintenance and prevents the risk of collapse.
  • Smoothed anti-clogging lamellae: All our clariflocculators are equipped with smoothed PVC lamellae, allowing a better sedimentation and offering a self-cleaning effect
  • Separate collection of floating mud: our twin weir channel makes it possible to collect them separately:
    • decanted water: treated water
    • floating mud: the floating fraction on the surface of lamellar clarifiers which, if not collected separately, decreases efficiency in TSS, COD, BOD5.

Stirrers:

    • 0,37kW, IP55, 3×400 V Motors
    • Rotation speed can be adjusted according to your instructions

Lamella block:

  • Lamella thickness: 3 mm
  • Horizontal lamella spacing: 45 mm
  • Inclination: 60°.
  • Spacing between lamellae at 60°: 39 mm (optional)
  • Lamellae surface area: 1 m²

Twin weir channel with siphonic partition:

  • Treated effluent weir channel collection.
  • Floating weir channel collection.

Inlets and outlets

  • Water inlet d160: either on the left side (as shown) or on the right side
  • Clean water outlet d110 opposite to the inlet: either on the right (as shown) or on the left
  • Safety overflow d160: either left or right (as shown)
  • Floating mud outlet d110: either on the right (as shown) or on the left
  • Mud outlet d63: either on the right (as shown) or on the left

Lamellae:

  • Flat 3 mm thick PVC. For drinking water applications, we use materials that meet the regulations you specify (PE 100 for ACS).
  • Supports: 316L stainless steel

Weir channel:

  • Polyethylene

Stirrers:

  • All the parts in contact with the liquid: stainless steel 316L

Connections:

  • PVC/ PP

Structure:

  • Internal and sole: 20 mm polypropylene
  • External: polypropylene foam >50mm
  • Stainless steel hood and cylinders.

Separate stirrers supply

  • If you have your favorite brand of stirrer you want to install yourself, you will get a discount for the 2 stirrers.
  • If you only want a large stirring tank, then you can order only one stirrer.

Installation of the clariflocculator

  • Industrial water storage layout according to your needs.
  • Lamella spacing as needed (base = 39 mm)
  • All entrances and exits can be equipped with :
    • connection up to d63
    • of adhesive/flange: diameter at choice

Mud evacuation

Floating mud (which must be removed periodically):

  • Connection of a solenoid valve to remove floating mud
    • On the clarifier frame for DL versions
    • inside a PP box for the DLE version

Available at any time:

  • Photos of completed installations
  • 2D/3D images
  • Technical data sheets

Delivered with :

  • CE certificate or declaration of incorporation
  • Tightness test report *
  • Assembly instructions
  • Operating manual
  • Detailed data sheet *
  • Spare parts and consumables list *

* If applicable

Shipping

All over the world, 1h2o3 packages have dimensions compatible with a transport in HC container.

Delays

  • 10 to 14 weeks.

Once the order has been placed, the above-mentioned delivery time starts (except weeks 31 to 34 and 51 to 52) from the date of receipt of payment and validation of the project plan (including all the options requested in case of special request). As soon as the equipment is ready, it will be shipped to you. A road transport requires on average one week for the installation, it can go up to 3 weeks for a container according to the destinations.

You may also like…

Shopping Cart
preloader